• English
    • Türkçe (Turkish)
Facebook Twitter Pinterest linkedin Telegram
  • NEWSLETTER
  • CONTACT US
  • FAQs
Facebook Twitter Pinterest linkedin Telegram
CSO TRADING CSO TRADING
Select category
  • Select category
  • ASCO
    • Accessories
    • Combustion Products
    • Miniature Solenoid Valves & Solutions
    • Solenoid Valves
  • EMAS
    • Basic Switches
    • Buttons
    • Cam Switches
    • Contactors
    • Control Boxes And Pedals
    • Electronic Products Group
    • Level Control Float Switches
    • Light Towers
    • Limit Switches
    • Motor Protection Switches
    • Signals
  • EMKO
    • Control Devices For Industrial Applications
      • Air Conditioning Controller
      • Cooking – Furnace
      • Differantial Controller
      • Dijital Power Regulator
      • Incubator Hatcher Controller
      • PLC Built-In Operator Panel
      • Profile Step Control Device
    • Generator Set Controller
      • ATS
      • Auto Start Moto-Pump Protection Control
      • Automatic Genset Controllers
      • Automatic Mains Failure Unit
      • AVR
      • Battery Charger
      • Manual
      • Modules
    • Measurement Control Devices
      • Counters
      • Digital Potentiometer
      • Digital Tachometer
      • Heating Cooling
      • Process Control Devices
      • Process Indicators
      • Timers
    • Poultry Automation
      • EPC Series
      • EPC-N
      • Hatcher Controller
    • Sensors
      • Humidity
      • Thermocouples
      • Thermoresistances
  • ENKO
    • Automatic Mains Failure Units – AMF Series
    • Automatic Transfer Switch Units – ATS Series
    • Battery Charger Units – EBC Series
    • Engine Start Units – ESR Series
    • Manual Start Units – MSU Series
  • ENTES
    • Electrical Measurement
    • Power Factor Correction
    • Power Quality and Energy
    • Protection & Control
  • FISHER
    • Actuators
    • Control Valves
    • Controllers and Instruments
    • Isolation and Shut off Valves
    • Regulators
  • KLEMSAN
    • Automation Products
    • Terminal Blocks and Accessories
  • METE ENERJİ
    • High Amperage
    • MeteCEE
    • MeteCON
    • MeteSOLID
    • MeteVENT
  • OMRON
    • HMI
    • Industrial PC
    • Input and Output (I/O)
    • Monitoring Products
    • PLC
    • Temperature Controllers
  • ROSEMOUNT
    • Flow
    • Gas Detectors and Sensors
    • Industrial Wireless
    • Level Measurement
    • Pressure Measurement
    • Tank Gauging
    • Temperature Transmitters
  • YASKAWA
    • AC Drives
Email: info@csotrading.com
Menu
CSO TRADING CSO TRADING
Browse Categories
  • OMRON
    • Input and Output (I/O)
    • Monitoring Products
    • PLC
    • Temperature Controllers
  • SCHNEIDER
  • EMKO
    • Measurement Control Devices
      • Heating Cooling
      • Process Control Devices
      • Process Indicators
      • Counters
      • Timers
      • Digital Potentiometer
      • Digital Tachometer
    • Sensors
      • Thermocouples
      • Thermoresistances
      • Humidity
    • Generator Set Controller
      • Automatic Genset Controllers
      • Automatic Mains Failure Unit
      • ATS
      • Manual
      • Modules
      • Battery Charger
      • AVR
      • Auto Start Moto-Pump Protection Control
      • Old Products
    • Control Devices For Industrial Applications
      • Profile Step Control Device
      • Cooking – Furnace
      • Differantial Controller
      • Air Conditioning Controller
      • PLC Built-In Operator Panel
      • Digital Temperature Humidity Controller
      • Incubator Hatcher Controller
      • Dijital Power Regulator
    • Poultry Automation
      • Hatcher Controller
      • EPC Series
      • EPC-N
  • ENTES
    • Power Quality and Energy
    • Electrical Measurement
    • Power Factor Correction
    • Protection & Control
  • YASKAWA
  • ASCO
    • Solenoid Valves
    • Miniature Solenoid Valves & Solutions
    • Combustion Products
    • Accessories
  • FISHER
    • Control Valves
    • Controllers and Instruments
    • Isolation and Shut off Valves
  • ROSEMOUNT
    • Pressure Measurement
    • Flow
  • KLEMSAN
    • Terminal Blocks and Accessories
    • Automation Products
  • EMAS
    • Cam Switches
    • Control Boxes And Pedals
    • Buttons
    • Signals
    • Limit Switches
    • Basic Switches
    • Contactors
    • Motor Protection Switches
    • Level Control Float Switches
    • Electronic Products Group
    • Light Towers
  • METE ENERJİ
    • MeteCON
    • MeteCEE
    • MeteVENT
    • MeteSOLID
    • High Amperage
  • PAKKENS
  • Home
  • About Us
  • Blog
  • Brands
  • Contact Us
Click to enlarge
HomeENKOManual Start Units - MSU Series ENKO MSU 5.2
Previous product
ENKO MSU 5.1
Back to products
Next product
ENKO EBC 1205

ENKO MSU 5.2

High performance with friendly user interface. Powerful program menu for enhanced control applications.

MSU 5.2 is equipped with Graphical LCD display and provides embedded inteligence for Gen-Set control applications, where high integration flexibility and “on-site” system monitoring is required.

Categories: ENKO, Manual Start Units - MSU Series
Share
Facebook Twitter Pinterest linkedin Telegram
  • Description
  • Shipping & Delivery
Description

MSU 5.2 is designed with enhanced applications in mind and equipped with all the necessary hardware and software to fulfill this demand.

The unit is equipped with LCD Graphic Display, where user interface is simple and efficient. The user can choose what to display and all the alarm events are described in words. User can select the active display language from the menu. All system parameters can be set very easily.

System hardware allows the user to interface with high demanding applications, where high number of peripheral control is required. The system software also carefully designed in order to allow dedicated functions to be characterized for a particular application. Simple logic functions can also be executed on the auxiliary inputs and outputs, hence reducing the number of peripheral components.

The controller has built-in multiple communication ports for enhanced interface with external control systems. RS232/485 can be used for onsite system configuration as well as remote control and monitoring of the system while integrated CAN Bus can communicate with engine ECU module. The system can also be interfaced with ENKO external I/O expansion modules for applications where specific dedicated hardware
control is needed.

Three analog variables can be measured and controlled and functions can be made to operate on these measured analog values. In the standby mode, the unit can also measure and control the engine body temperature. The load can be controlled both manual and automatic, where both MCB and GCB contactors can be controlled from the front panel.

The system can be used for dual Gen-Set applications, where one can be selected to be master and allow to control the others as slave units. MSU 5.1 allows remote programming, monitoring and GSM interface with any external control system.

KEY FEATURES

  • Graphical LCD display with white backlight (128×64 resolution)
  • Alarm indication on graphical LCD display
  • Full control and protection of diesel engine and alternator
  • 8 digital input ports (all configurable)
  • 3 analog input ports
  • 6 digital output ports (4 configurable, all outputs dry contact relay)
  • Automatic, Test and Manual operation modes
  • 3 phase Generator voltage and current sensing
  • Automatic or manual control of the GCB relay
  • Measurement of KW, KVA, KVAr, KWh and Power Factor
  • TrueRMS measurements ensure best accuracy
  • Engine pre-heat function
  • RS232/485 ModBUS RTU protocol can be used for remote monitoring and programming
  • SMS messaging function (GSM modem required)
  • Manual and remote start
  • Full digital calibration on all analog measuring inputs
  • PC interface for monitoring and system programing, SCADA control
  • CAN and magnetic pick-up for RPM sensing
  • Characteristic adaptation table for temperature and pressure sensors
  • Remote start and stop interface
  • 6 engine and 6 maintenance timers
  • Real-time clock
  • Date and time stamped event log (Last 50 events)
  • Date and time stamped alarm log (Last 30 alarms)
  • AT+T compatible modem interface
  • TTL communication port
  • Isolated RS485 communication port
  • CanBUS / J1939 communication port
  • Remote monitoring function
  • Phase sequence detection
  • Reverse power protection
  • Earth current measurement
  • Programmable weekly / monthly run schedule
  • Dedicated contactor open and close buttons for the GCB
  • Automatic alarm acknowledge function via menu programming
  • Electronic engine compatible (ECU communication)
  • Earth leakge measurement
  • Wide operating temperature range (-25C to +70C)
  • IP 52 front panel protection
  • Customizable monitoring screens

KEY BENEFITS

  • 3 level password protection and user types ensure the user and the technical expert access the appropriate parameters
  • Easily receive information regarding the status of the Generator and view/edit parameters by sending receiving SMS messages
  • Option to configure parameters using the front panel or via licence-free ENKO Pro-Link Configuration Suite PC software
  • Built-in dedicated functions for specific applications like Telecom
  • Internal relay outputs eliminate the need for external relay use
  • High resolution graphical LCD user interface enables simple and user-friendly operation
  • Remote start / stop interface allows the controller to be used from distance
  • The time and date stamped alarm and event logs allow easier and faster troubleshooting and maintenance
  • Program weekly / monthly work schedules to test or simply maintain the Generator
  • Earth current measurement allows the calculation of loss due to earth current leakage
  • ECU communication can be made through the CanBUS / J1939 and pre-loaded engine configurations allow easy set-up
  • Configurable I/O ports provide custom solutions for different applications and can be easly programmed via selecting from hundreds of pre-loaded functions
Shipping & Delivery

Shipments and returns

Your pack shipment

Packages are generally dispatched within 1 week after receipt of payment and are shipped via DHL or EMS post service ( based on agreement) with tracking number. If you prefer delivery by your account number of forwarder please contact us before choosing this method. Whichever shipment choice you make, we will provide you with a link to track your package online.

Shipping fees include handling and packing fees as well as postage costs. Handling fees are fixed, whereas transport fees vary according to total weight of the shipment. We advise you to group your items in one order. We cannot group two distinct orders placed separately, and shipping fees will apply to each of them. Your package will be dispatched at your own risk, but special care is taken to protect fragile objects.

Boxes are amply sized and your items are well-protected.

Related products

Close

ENKO EBC 2410

Charging Lead-Acid batteries in three controlled stages for best performance

SMPS technology for maximum efficiency and reliablity with minimum heat dissipation.

Read more
Close

ENKO EBC 1205

Charging Lead-Acid batteries in three controlled stages for best performance

SMPS technology for maximum efficiency and reliablity with minimum heat dissipation.

Read more
Close

ENKO AMF 3.4

Efficient and versatile control for all Gen-Set applications.

AMF 3.1 offers versatile control functions for single or multiple Generator/Mains applications.

Read more
Close

ENKO AMF 3.1

Efficient and versatile control for all Gen-Set applications.

AMF 3.1 offers versatile control functions for single or multiple Generator/Mains applications.

Read more
Close

ENKO AMF 3.4L

Flexible control of Gen-Sets with intelligent system management and Real-Time clock

AMF 3.4L is designed with high demanding applications in mind. The unit is equipped with an LCD Graphic display for simple and efficient user interface. The user can select the display language.

Read more
Close

ENKO EBC 1210

Charging Lead-Acid batteries in three controlled stages for best performance

SMPS technology for maximum efficiency and reliablity with minimum heat dissipation.

Read more
Close

ENKO EBC 2420

Charging Lead-Acid batteries in three controlled stages for best performance

SMPS technology for maximum efficiency and reliablity with minimum heat dissipation.

Read more
Close

ENKO AMF 4.0

Friendly user interface with analog bar graph displays...

AMF4.0 controller includes two analog bar-graph displays to indicate direct readings from engine temperature and oil pressure gauges. AMF4.0 offers flexible control of load power, fed from mains and generator bus-bars.

Read more
/** * The template for displaying the footer * */ ?>

Now we are an industrial automation based distributor company who has wide experiance about process contol applications.

ÜÇEVLER MAH. 72 (220) SK AKNİL PLAZA NO: 6 KAT:3/41 16120 Nilüfer / BURSA-TURKEY
Phone: 0090 224 4414012
Email: info@csotrading.com
MENU
  • About Us
  • Blog
  • Brands
  • Contact Us
2021 Csotrading.com. All Rights Reserved.
  • Blog
Scroll To Top

HEY YOU, SIGN UP AND CONNECT TO WOODMART!

Be the first to learn about our latest trends and get exclusive offers

Will be used in accordance with our Privacy Policy