The unit is equipped with LCD Graphic Display, where user interface is simple and efficient. The user can choose what to display and all the alarm events are described in words. User can select the active display language from the menu. All system parameters can be set very easily.

System hardware allows the user to interface with high demanding applications, where high number of peripheral control is required. The system software also carefully designed in order to allow dedicated functions to be characterized for a particular application. Simple logic functions can also be executed on the auxiliary inputs and outputs, hence reducing the number of peripheral components.

The controller has built-in multiple communication ports for enhanced interface with external control systems. RS232/485 can be used for onsite system configuration as well as remote control and monitoring of the system while integrated CAN Bus can communicate with engine ECU module. The system can also be interfaced with ENKO external I/O expansion modules for applications where specific dedicated hardware
control is needed.

Three analog variables can be measured and controlled and functions can be made to operate on these measured analog values. In the standby mode, the unit can also measure and control the engine body temperature. The load can be controlled both manual and automatic, where both MCB and GCB contactors can be controlled from the front panel.

The system can be used for dual Gen-Set applications, where one can be selected to be master and allow to control the others as slave units. MSU 5.1 allows remote programming, monitoring and GSM interface with any external control system.

KEY FEATURES

• Graphical LCD display with white backlight (128×64 resolution)
• Alarm indication on graphical LCD display
• Full control and protection of diesel engine and alternator
• 8 digital input ports (all configurable)
• 3 analog input ports
• 6 digital output ports (4 configurable, all outputs dry contact relay)
• Automatic, Test and Manual operation modes
• 3 phase Generator voltage and current sensing
• Automatic or manual control of the GCB relay
• Measurement of KW, KVA, KVAr, KWh and Power Factor
• TrueRMS measurements ensure best accuracy
• Engine pre-heat function
• RS232/485 ModBUS RTU protocol can be used for remote monitoring and programming
• SMS messaging function (GSM modem required)
• Manual and remote start
• Full digital calibration on all analog measuring inputs
• PC interface for monitoring and system programing, SCADA control
• CAN and magnetic pick-up for RPM sensing
• Characteristic adaptation table for temperature and pressure sensors
• Remote start and stop interface
• 6 engine and 6 maintenance timers
• Real-time clock
• Date and time stamped event log (Last 50 events)
• Date and time stamped alarm log (Last 30 alarms)
• AT+T compatible modem interface
• TTL communication port
• Isolated RS485 communication port
• CanBUS / J1939 communication port
• Remote monitoring function
• Phase sequence detection
• Reverse power protection
• Earth current measurement
• Programmable weekly / monthly run schedule
• Dedicated contactor open and close buttons for the GCB
• Automatic alarm acknowledge function via menu programming
• Electronic engine compatible (ECU communication)
• Earth leakge measurement
• Wide operating temperature range (-25C to +70C)
• IP 52 front panel protection
• Customizable monitoring screens

KEY BENEFITS

• 3 level password protection and user types ensure the user and the technical expert access the appropriate parameters
• Easily receive information regarding the status of the Generator and view/edit parameters by sending receiving SMS messages
• Option to configure parameters using the front panel or via licence-free ENKO Pro-Link Configuration Suite PC software
• Built-in dedicated functions for specific applications like Telecom
• Internal relay outputs eliminate the need for external relay use
• High resolution graphical LCD user interface enables simple and user-friendly operation
• Remote start / stop interface allows the controller to be used from distance
• The time and date stamped alarm and event logs allow easier and faster troubleshooting and maintenance
• Program weekly / monthly work schedules to test or simply maintain the Generator
• Earth current measurement allows the calculation of loss due to earth current leakage
• ECU communication can be made through the CanBUS / J1939 and pre-loaded engine configurations allow easy set-up
• Configurable I/O ports provide custom solutions for different applications and can be easly programmed via selecting from hundreds of pre-loaded functions

The post ENKO MSU 5.2 appeared first on CSO TRADING.

The unit is equipped with an ARM Processor for high performance. All the Mains and Generator parameters are measured, processed and executed simultaneously, which in return allows enhanced functions for single and multiple Gen-Set applications.

System hardware allows the user to interface with high demanding applications, where high number of peripheral control is required. The system software also carefully designed in order to allow dedicated functions to be characterized for a particular application. Simple logic functions can also be executed on the auxiliary inputs and outputs, hence reducing the number of peripheral instruments.

The controller is equipped with multiple communication ports for enhanced interface with external control systems. RS232/485 can be used for on-site system configuration as well as remote control and monitoring of the system while integrated CAN Bus can communicate with engine ECU module. The system can also be interfaced with ENKO external i/o expansion modules for applications where specific dedicated hardware control is needed.

Front panel design includes 3 analog displays for Engine temperature, Oil pressure and Fuel level indication. Functions can be made to operate on these measured analog values. In the standby mode, the unit can also measure and control the engine body temperature. The load can be controlled both manual and automatic, where both MCB and GCB contactors can be controlled from the front panel.

The system can be used for multiple Gen-Set applications, where one can be selected to be master and allow to control the others as slave units. MSU5.1 allows remote programming, monitoring and GSM interface with any external control system.

KEY FEATURES

• 5 LED displays and 3 analog bar graph displays
• LED alarm indicators on front panel
• Full control and protection of diesel engine and alternator
• 8 digital input ports (all configurable)
• 3 analog input ports
• 6 digital output ports (4 configurable, all outputs dry contact relay)
• Automatic, Test and Manual operation modes
• 3 phase Generator voltage and current sensing
• Automatic or manual control of the GCB relay
• Measurement of KW, KVA, KVAr, KWh and Power Factor
• TrueRMS measurements ensure best accuracy
• Engine pre-heat function
• RS232/485 ModBUS RTU protocol can be used for remote monitoring and programming
• SMS messaging function (GSM modem required)
• Manual and remote start
• Full digital calibration on all analog measuring inputs
• PC interface for monitoring and system programing, SCADA control
• CAN and magnetic pick-up for RPM sensing
• Characteristic adaptation table for temperature and pressure sensors
• Remote start and stop interface
• 6 engine and 6 maintenance timers
• Real-time clock
• Date and time stamped event log (Last 50 events)
• Date and time stamped alarm log (Last 30 alarms)
• AT+T compatible modem interface
• TTL communication port
• Isolated RS485 communication port
• CanBUS / J1939 communication port
• Remote monitoring function
• Phase sequence detection
• Reverse power protection
• Earth current measurement
• Programmable weekly / monthly run schedule
• Automatic alarm acknowledge function via menu programming
• Electronic engine compatible (ECU communication)
• Earth leakge measurement
• Wide operating temperature range (-35C to +70C)
• IP 52 front panel protection

KEY BENEFITS

• 3 level password protection and user types ensure the user and the technical expert access the appropriate parameters
• Easily receive information regarding the status of the Generator and view/edit parameters by sending receiving SMS messages
• Option to configure parameters using the front panel or via licence-free ENKO Pro-Link Configuration Suite PC software
• Built-in dedicated functions for specific applications like Telecom
• Internal relay outputs eliminate the need for external relay use
• Five LED displays allow seamless operation under harsh temperature conditions
• Remote start / stop interface allows the controller to be used from distance
• The time and date stamped alarm and event logs allow easier and faster troubleshooting and maintenance
• Program weekly / monthly work schedules to test or simply maintain the Generator
• Earth current measurement allows the calculation of loss due to earth current leakage
• ECU communication can be made through the CanBUS / J1939 and pre-loaded engine configurations allow easy set-up
• Configurable I/O ports provide custom solutions for different applications and can be easly programmed via selecting from hundreds of pre-loaded functions

The post ENKO MSU 5.1 appeared first on CSO TRADING.

All voltage and current values are monitored in True RMS values and displayed on the panel. There is no need for additional panel meters. Load power is also measured and displayed. User can operate functions on these values.

The unit also provides all the necessary protection and monitoring of the engine values. The engine temperature and oil pressure is also displayed on analog bar graph displays, hence eliminating the use of additional gauges on the panel. Pre-heat function can be used for secure starting under very cold whether conditions.

The DC battery voltage is measured and displayed. Alarm function can also be initiated, depending on the battery supply voltage. All alarms are logged and the last 10 alarms can be seen in the past log records. The unit can be remotely controlled by a remote start input function, hence allowing gen-set to be controlled by other systems. Engine working hours are recorded in the system memory. Load power is also measured and monitored and special functions can be activated on these measured values. User can also program periodic service time for the engine.

The unit has configurable i/o ports which can be programmed according to user application. Analog measuring input calibration can be made from the menu. There is no need to open the unit enclosure. Five digital displays allow most critical values to be displayed simultaneously, which allows easy monitoring from the front panel.

The post ENKO MSU 4.0 appeared first on CSO TRADING.

3 phase generator voltages are measured in true RMS and also 3 phase generator load current is measured. Phase sequence and Reverse Power detection and protection is provided for the Generator.

User can program any of the auxiliary i/o ports for custom applications. The menu offers extensive control for each i/o and all the parameters can be configured via PC, using the ENKO PRO-Link configuration program. All the parameters can also be configured from the front panel controls. SMS messages can be sent, using optional GSM interface module. The unit can be programmed from remote distance.

Built-in graphical display offers easy reading of all the parameters during run time and programming. There are 3 analog sensor inputs available and characteristics can be configured from the menu to adapt any type of sensor. There are altogether 13 i/o ports available, among which many can be configured by the user.

Load power is also measured and can be used with dedicated functions in the menu. Decisions can be made depending on active and/or reactive load power value. Total accumulated active/reactive power is also measured and recorded.

The real-time clock allows weekly and/or monthly generator control programs to be made, which can manage periodic test run and /or disabling the generator at certain hours or on specific days.

Magnetic pick-up input is available for reliable and accurate measurement and control of engine speed.

KEY FEATURES

• Graphical LCD display with white backlight (128×64 resolution)
• Alarm indication on graphical LCD display
• Full control and protection of diesel engine and alternator
• 8 digital input ports (all configurable)
• 3 analog input ports
• 7 digital output ports (5 configurable, all outputs dry contact relay)
• Automatic, Test and Manual operation modes
• 3 phase Generator voltage and current sensing
• Automatic or manual control of the GCB relay
• Measurement of KW, KVA, KVAr, KWh and Power Factor
• TrueRMS measurements ensure best accuracy
• Engine pre-heat function
• RS232/485 ModBUS RTU protocol can be used for remote monitoring and programming
• SMS messaging function (GSM modem required)
• Manual and remote start
• Full digital calibration on all analog measuring inputs
• PC interface for monitoring and system programing, SCADA control
• Magnetic pick-up for RPM measurement
• Characteristic adaptation table for temperature and pressure sensors
• Remote start and stop interface
• 4 configurable engine running and maintenance timers
• Real-time clock
• Date and time stamped event log (Last 30 events)
• Date and time stamped alarm log (Last 15 alarms)
• AT+T compatible modem interface
• 2 TTL communication ports
• Remote monitoring function
• Phase sequence detection
• Reverse power protection
• Programmable weekly / monthly run schedule
• Multiple display languages
• Dedicated contactor open and close buttons for the GCB
• Wide operating temperature range (-25C to +70C)
• IP 52 front panel protection
• Customizable monitoring screens

KEY BENEFITS

• 3 level password protection and user types ensure the user and the technical expert access the appropriate parameters
• Easily receive information regarding the status of the Generator and view/edit parameters by sending receiving SMS messages
• Option to configure parameters using the front panel or via licence-free ENKO Pro-Link Configuration Suite PC software
• Built-in dedicated functions for specific applications like Telecom
• Internal relay outputs eliminate the need for external relay use
• High resolution graphical LCD user interface enables simple and user-friendly operation
• Remote start / stop interface allows the controller to be used from distance
• The time and date stamped alarm and event logs allow easier and faster troubleshooting and maintenance
• Program weekly / monthly work schedules to test or simply maintain the Generator
• Configurable I/O ports provide custom solutions for different applications and can be easly programmed via selecting from hundreds of pre-loaded functions

The post ENKO MSU 3.4L appeared first on CSO TRADING.

The unit is designed with high process power for versatile and accurate control of generator functions. It controls 3 phase or single phase generator voltages while monitoring single phase generator load current.

User can program any of the auxiliary i/o ports for custom applications. The menu offers extensive control for each i/o and all the parameters can be configured via PC, using the ENKO PRO-Link configuration program. All the parameters can also be configured from the front panel controls. SMS messages can be sent, using optional GSM interface module.

Many of the control variables can be displayed as required. The analog sensor characteristics can be adjusted from the menu to adapt any sensor. There are altogether 10 i/o ports available, where each one can be independently configured via program menu.

Load power is also measured and can be used with dedicated functions in the menu. Decisions can be made depending on active and/or reactive power of the load. Total accumulated power is also measured and recorded.

MSU3.1 control module is optimized for enhanced applications, where customer demands are high and allows minimal solutions for all genset applications with high reliability.

KEY FEATURES

• 2 LED displays
• LED alarm indicators on front panel
• Full control and protection of diesel engine and alternator
• 6 digital input ports (all configurable)
• 2 analog input ports
• 5 digital output ports (3 configurable, all outputs dry contact relay)
• Automatic and Test operation modes
• Three phase Generator voltage and single phase current sensing
• Automatic or manual control of the GCB relay
• Measurement of KW, KVA, KVAr, KWh and Power Factor
• TrueRMS measurements ensure best accuracy
• Engine pre-heat function
• RS232/485 ModBUS RTU protocol can be used for remote monitoring and programming
• SMS messaging function (GSM modem required)
• Manual and remote start
• Full digital calibration on all analog measuring inputs
• PC interface for monitoring and system programing, SCADA control
• Characteristic adaptation table for temperature and pressure sensors
• Remote start and stop interface
• 4 configurable engine running and maintenance timers
• Alarm log (Last 15 alarms)
• AT+T compatible modem interface
• TTL communication port
• Remote monitoring function
• Wide operating temperature range (-25C to +70C)
• IP 52 front panel protection
• Customizable monitoring screens

KEY BENEFITS

• 3 level password protection and user types ensure the user and the technical expert access the appropriate parameters
• Easily receive information regarding the status of the Generator and view/edit parameters by sending receiving SMS messages
• Option to configure parameters using the front panel or via licence-free ENKO Pro-Link Configuration Suite PC software
• Built-in dedicated functions for specific applications like Telecom
• Internal relay outputs eliminate the need for external relay use
• Two LED displays allow seamless operation under harsh temperature conditions
• Remote start / stop interface allows the controller to be used from distance
• Configurable I/O ports provide custom solutions for different applications and can be easly programmed via selecting from hundreds of pre-loaded functions

The post ENKO MSU 3.1 appeared first on CSO TRADING.

Cranking can be achieved manual or automatic, depending on the selected operation mode. Start of engine is detected automatically and crank relay is controlled accordingly.

The alternator values are also monitored and all values are measured and calculated as True RMS values, avoiding false voltage measurements due to high load harmonic contents, hence ensuring reliable operation. The AC voltage inputs are suitable up to 500Vac.

There are three operation modes which the user can select from. Controller will control the load according to the selected mode.

All the measurement calibration can be made through the program menu and there is no need for any trimmer adjustments. The unit menu is protected with two-stage password, allowing user and experienced technician to reach appropriate menu parts.

KEY FEATURES

• Offers economical solutions for single Gen-Set applications
• Full control and protection of diesel engine and alternator
• Single display for voltage and frequency
• Configurable auxiliary inputs and outputs
• True RMS measurements ensure accuracy
• Automatic and Test operation modes
• Digital calibrations on measuring inputs
• Small housing for space saving applications
• Automatic control of GCB relay
• 4 configurable input and output ports for peripheral control
• Single phase TrueRMS Generator voltage measurement
• Pre-heat function before ignition

KEY BENEFITS

• The unit menu is protected with two-stage password, allowing user and experienced technician to reach appropriate menu parts

The post ENKO MSU 2.0 appeared first on CSO TRADING.