The controller offers 5 digital displays for monitoring system values. All voltages and currents are measured as True RMS values, with better than 1% full scale accuracy.

All three phase voltages of mains and generator side are measured as well as the load phase currents. This allows optimum control of load supply for safe operation. The illuminated mimic diagram allows easy monitoring and function controls on the front panel.

All system parameters can be configured through an extensive menu. All the I/O ports can be configured and set to match the required application characteristics and all measuring analog inputs can be calibrated, using the system menu. Preset temperature and pressure gauge characteristics can also be selected direct from the menu.

The controller also includes a “Remote Start” input so that it can be interfaced with other control systems. Remote start characteristics can also be set through the system menu.

The post ENKO AMF 4.0 appeared first on CSO TRADING.

3 phase mains and 3 phase generator voltages are measured in TrueRMS and also 3 phase generator load current is measured. Phase sequence and Reverse Power Protection is provided for the Generator. User can program any of the auxiliary i/o ports for custom applications. The menu offers extensive control for each i/o and all the parameters can be configured via PC, using the ENKO PRO-Link configuration program. All the parameters can also be configured from the front panel controls. SMS messages can be sent, using optional GSM interface module. The unit can be programmed from remote distance.

Built-in graphical display offers easy reading of all the parameters during run time and programming. There are 3 analog sensor inputs available and characteristics can be adjusted from the menu to fit any type of sensor. There are altogether 13 i/o ports available, among which many can be configured by the user.

Load power is also measured and can be used with dedicated functions in the menu. Decisions can be made depending on active and/or reactive power of the load. Total accumulated active/reactive power is also measured and recorded.

The real-time clock allows weekly and/or monthly generator control programs to be made, which can manage periodic test run and /or disabling the generator at certain hours or on specific days.

Magnetic pick-up input is available for reliable and accurate measurement and control of engine speed.

KEY FEATURES

• PC Interface for monitoring and   system programming, SCADA control
• Real-time clock and time stamped alarm logging
• Phase sequence detection and reverse power protection
• Measurement of KW, KVA, KVAr, KWh and Power Factor
• Magnetic Pick-up input for RPM measurement
• Independent control of MCB and GCB from front panel
• Phase sequence and reverse power protection for the Generator
• Full digital calibration of all analog measuring inputs
• Graphical LCD display with white LED backlight
• Dedicated open and close buttons for MCB and GCB control
• SMS message option for alarms
• Event loging for the last 30 and alarm logging for the last 15 incidents
• 3 phase Mains voltage and 3 phase Generator voltage and current measurement

KEY BENEFITS

• Automatic or Manual transfer of the Load between the Mains and the Generator
• Easily receive information regarfing the status of the Generator and view/edit parameters by sending and receiving SMS messages over a mobile phone
• Option to configure paramters using the front panel or via ENKO Pro-Link SCADA software
• Dedicated functions for specific applications like Telecom
• Program weekly work schedules to test or simply run the Generator
• Internal relay outputs eliminate the need for external relay use
• The time and date stamped alarm and event logs allow easier and faster troubleshooting and maintenance
• Three user levels unsures the safety of the system
• Graphical user interface allows simple and user-friendly operation
• The user can define his/hers own custom measurement page

The post ENKO AMF 3.4L appeared first on CSO TRADING.

3 phase mains and 3 phase generator voltages are measured in true RMS and also 3 phase generator load current is measured. Phase sequence and Reverse Power Protection is provided for the Generator.

User can program any of the auxiliary i/o ports for custom applications. The menu offers extensive control for each i/o and all the parameters can be configured via PC, using the ENKO PRO-Link configuration program. All the parameters can also be configured from the front panel controls. SMS messages can be sent, using optional GSM interface module. The unit can be programmed from remote distance.

Many of the control variables can be displayed as required on the front panel. There are 3 analog sensor inputs available and characteristics can be adjusted from the menu to fit any type of sensor. There are altogether 13 i/o ports available, among which many can be configured by the user.

Load power is also measured and can be used with dedicated functions in the menu. Decisions can be made depending on active and/or reactive power of the load. Total accumulated active/reactive power is also measured and recorded.

The real-time clock allows weekly and/or monthly generator control programs to be made, which can manage periodic test run and /or disabling the generator at certain hours or on specific days.

Magnetic pick-up input is available for reliable and accurate measurement and control of engine speed.

KEY FEATURES

• PC Interface for monitoring and   system programming, SCADA control
• Real-time clock and time stamped alarm logging
• Phase sequence detection and reverse power protection
• Measurement of KW, KVA, KVAr, KWh and Power Factor
• Magnetic Pick-up input for RPM measurement
• Independent control of MCB and GCB from front panel
• Phase sequence and reverse power protection for the Generator
• Full digital calibration of all analog measuring inputs
• 3 phase Mains voltage and 3 phase Generator voltage and current measurement
• Daily or weekly control patterns for the Generator
• Engine working hour meter and service timer
• Independent control of MCB and GCB from front panel

KEY BENEFITS

• Automatic or Manual transfer of the Load between the Mains and the Generator
• Easily receive information regarfing the status of the Generator and view/edit parameters by sending and receiving SMS messages over a mobile phone
• Option to configure paramters using the front panel or via ENKO Pro-Link SCADA software
• Dedicated functions for specific applications like Telecom
• Program weekly work schedules to test or simply run the Generator
• Internal relay outputs eliminate the need for external relay use
• The time and date stamped alarm and event logs allow easier and faster troubleshooting and maintenance
• 3 LED displays and 20 dedicated alarm indicator LED’s provide a comprehensive overview of the entire system
• Total of 18 I/O ports are provided which 13 of them are user configurable

The post ENKO AMF 3.4 appeared first on CSO TRADING.

The unit is designed with high process power for versatile and accurate control of all Gen-Set functions. It controls 3 phase mains and single phase generator voltage and also monitors generator load current.

User can program any of the auxiliary i/o ports for custom applications. The menu offers extensive control for each i/o and all the parameters can be configured via PC, using the ENKO PRO-Link configuration program. All the parameters can also be configured from the front panel controls. SMS messages can be sent, using optional GSM interface module.

Many of the control variables can be displayed as required. The analog sensor characteristics can be adjusted from the menu to fit any kind of sensor. There are altogether 17 i/o ports available, among which many can be configured by the user.

Load power is also measured and can be used with dedicated functions in the menu. Decisions can be made depending on active and/or reactive power of the load. Total accumulated power is also measured and recorded.

AMF3.2 control module is optimized for enhanced applications, where customer demands are high and allows minimal solutions for all genset applications with high reliability.

Magnetic pick-up input is available for reliable and accurate measurement and control of engine speed.

KEY FEATURES

• PC Interface for monitoring and   system programming, SCADA control
• Modbus RTU communication port for optional GSM modem communication
• 20 alarm indicators right on the front panel
• Measurement of KW, KVA, KVAr, KWh and Power Factor
• Magnetic Pick-up input for RPM measurement
• Automatic and Test operation modes
• Full digital calibration of all analog measuring inputs
• 17 I/O ports which 13 of them can be user configured for custom applications
• Engine running hours and maintenance timers
• Alarm log for the last 15 and event log for the last 30 events
• 3 phase Mains voltage and single phase Generator voltage and current measurement
• Remote start and stop interface

KEY BENEFITS

• Automatic or Manual transfer of the Load between the Mains and the Generator
• Easily receive information regarding the status of the Generator and view/edit parameters by sending and receiving SMS messages over a mobile phone
• Option to configure paramters using the front panel or via ENKO Pro-Link SCADA software
• Dedicated functions for specific applications like Telecom
• Internal relay outputs eliminate the need for external relay use
• The time and date stamped alarm and event logs allow easier and faster troubleshooting and maintenance
• Remote start/stop interface allows the user to command the Generator from distance

The post ENKO AMF 3.2 appeared first on CSO TRADING.

The unit is designed with high process power for versatile and accurate control of all Gen-Set functions. It controls 3 phase mains and single phase generator voltage and also monitors generator load current.

User can program any of the auxiliary i/o ports for custom applications. The menu offers extensive control for each i/o and all the parameters can be configured via PC, using the ENKO PRO-Link configuration program. All the parameters can also be configured from the front panel controls. SMS messages can be sent, using optional GSM interface module.

Many of the control variables can be displayed as required. The analog sensor characteristics can be adjusted from the menu to fit any kind of sensor. There are altogether 10 i/o ports available, where each one can be independently configured via program menu.

Load power is also measured and can be used with dedicated functions in the menu. Decisions can be made depending on active and/or reactive power of the load. Total accumulated power is also measured and recorded.

AMF3.1 control module is optimized for enhanced applications, where customer demands are high and allows minimal solutions for all genset applications with high reliability.

KEY FEATURES

• PC Interface for monitoring and   system programming, SCADA control
• 10 Configurable inputs and outputs for customer specific applications
• Measurement of KW, KVA, KVAr, KWh and Power Factor
• Full digital calibration of all analog measuring inputs
• Automatic and Test operation modes
• Two LED displays for easy reading of measurements and paramters
• 20 different alarm indicators right on the front panel
• 3 phase Mains voltage and single phase Generator voltage and current measurement
• Characteristic adaptation table for temperature and pressure sensors
• Independent control of MCB and GCB from front panel
• ModBUS RTU communication interface port

KEY BENEFITS

• Automatic or Manual transfer of the Load between the Mains and the Generator
• Easily receive information regarding the status of the Generator and view/edit parameters by sending and receiving SMS messages over a mobile phone
• Option to configure paramters using the front panel or via ENKO Pro-Link SCADA software
• Dedicated functions for specific applications like Telecom
• Internal relay outputs eliminate the need for external relay use
• 3 password protection levels and user types ensure the user and the technical expert accesses the appropriate paramters.
• The two LED displays allow seamless operation under harsh temperature conditions

The post ENKO AMF 3.1 appeared first on CSO TRADING.

Full Generator control functions can be implemented through the unit program menu. The unit has a configuration parameter menu which can be accessed from the front panel. All engine parameters can be monitored and full engine protection is provided.

Cranking can be achieved manual or automatic, depending on the selected operation mode. Start of engine is detected automatically and crank relay is controlled accordingly.

The alternator values are also monitored and all values are measured and calculated as True RMS values, avoiding false voltage measurements due to high load harmonic contents, hence ensuring reliable operation. The AC voltage inputs are suitable up to 500Vac.

AMF2.0 is designed to fulfill all the required functions to control the load. Mains is monitored on all three phases and protection limits are programmable through the menu. There are three operation modes which the user can select from. Controller will control the load according to the selected mode.

All the measurement calibration can be made through the program menu and there is no need for any trimmer adjustments. The unit menu is protected with two-stage password, allowing user and experienced technician to reach appropriate menu parts.

KEY FEATURES

• Offers economical solutions for single Gen-Set applications
• Full control and protection of diesel engine and alternator
• Single display for voltage and frequency
• Configurable auxiliary inputs and outputs
• True RMS measurements ensure accuracy
• Automatic and Test operation modes
• Digital calibrations on measuring inputs
• Small housing for space saving applications
• Full automatic Mains Failure control functions
• Automatic control of MCB and GCB relays
• 4 configurable input and output ports for peripheral control
• 3 phase TrueRMS Mains voltage and single phase TrueRMS Generator voltage measurement
• Pre-heat function before ignition

KEY BENEFITS

• Automatic transfer of the Load between the Mains and the Generator
• The unit menu is protected with two-stage password, allowing user and experienced technician to reach appropriate menu parts

The post ENKO AMF 2.0 appeared first on CSO TRADING.