Trans-KEY.DISP
Manual and Remote Start Unit with Key Switch Over / Under Voltage protection Suitable for Diesel or Gasoline engine Selectable Generator, Pump and Fire Pump applications Engine working hour counter for Trans-KEY.DISP model Parameter configuration via RS-232 serial communication Configurable Fail Safe mode
Trans-Messenger
Trans Series GSM Communication Module
Easy plugging to all Trans Series controllers, Two way SMS communication (GenSet Mobile), COntrols the generator and monitors status information of the generator by SMS, Remote control via GSM, Sends Alarm informations pre-defined GSM numbers, User may control the device,Clear alarms,RESET, Change MODE's,STOP,START,access the PARAMETRE's of device, Change the parameters and enquire information about generator's active status,
Trans-Midi AMF
Automatic GenSet Controller with Transfer Switching
Log last 50 events & alarm information wiht measured values
Statistics records
Mains & Generator phase sequence control
Selectable Resistive sender types; Pt-100 VDO, US, GM, Ford, Datcon, etc...
CanBus J1939 ECU communication
SPN, FMI and OC values reading from engines via J1939
Remote Start/Stop Speed and Idle mode Control via J1939
Local Remote Control and Visualisation function
Trans-MidiAUTO
Automatic GenSet Controller
Log last 50 events & alarm information wiht measured values
Statistics records
Generator phase sequence control
Power factor measurement for 3 phases
Selectable Resistive sender types; Pt-100 VDO, US, GM, Ford, Datcon, etc...
CanBus J1939 ECU communication
SPN, FMI and OC values reading from engines via J1939
Active, Reactive, Apparent power measurement
Trans-MiniAMF
Automatic Genset Controller with Transfer Switching
CanBus J1939 ECU communication
Remote Start/Stop, Speed and Idle mode control via J1939
Power factor measurement for 1 phases
Selectable Resistive sender types; Pt-100, VDO, US, GM, Ford, Datcon, etc...
Speed sensing from alternator voltage or magnetic pickup
SPN, FMI and OC values reading from engines via J1939
Trans-MiniATS
Trans-MiniAUTO
Automatic Genset Controller
Log last 50 events & alarm information with measured values
Statistics records
Power factor measurement for 1 phases
Selectable Resistive sender types; Pt-100, VDO, US, GM, Ford, Datcon, etc..
Engine control
Compatible to Diesel or Gas generators
SPN, FMI and OC values reading from engines via J1939
Trans-MiniAUTO++
Automatic Genset Controller
Canbus J1939 ECU communication
Log last 50 events & alarm information with measured values
Statistics records
Power factor measurement for 3 phases
Selectable Resistive sender types; Pt-100, VDO, US, GM, Ford, Datcon, etc..
SPN, FMI and OC values reading from engines via J1939
Trans-MiniPump
Trans-Web_Ethernet.R
Trans-Series Embedded Web Server Communication Module (by Ethernet)
Easy plugging to all Trans Series controllers, Ethernet Communication, Built-in http web pages, Remote GenSet control by Smart phones an PC, E-mail sending when the alarm situation, 4 GB SD memory, User definable data logging period, Alarm observation and archive, DHCP supported
Trans.DUAL
Failure and time interval
Easy plugging to Trans-AMF and Trans-AUTO controllers Dual GenSet working by time interval Priority selection When the failure situation,automatically start to another GenSet Equal aging by working hours Definable time interval period Load transfer without power interruption