ESM-3700-N
Single Set Process Indicator
Adjustable decimal point
5 Stage analog input filter option
Maximum and minimum measurement value are
registered to the devices memory
Maximum or minimum measurement value van be shown
continuously on the display
4 Digits display
Easily adjustable from front panel
Configurable display scale between -1999 and 9999
Selectable universal process Input
(0-10Vdc, 0-1Vdc, 0-60mVdc, 0-20mAdc, 4-20mAdc)
User can be adjust device’s reading value for selected input type
Alarm output, Relay or SSR driver output (It must be determined in order)
Adjustable alarm set value from front panel
ESM-3710-N
Digital ON/OFF Temperature Control Device
Installing parameters using Prokey
Password protection for programming section
Adjustable internal buzzer according to
sensor defect status
4 Digits Display
NTC Input or PTC Input or
J type thermocouple Input or Ktype
thermocouple Input or
2-Wire PT-100 Input ori 2-Wire PT-1000 Input
(Must be determined in order.)
Adjustable temperature offset
ON/OFF temperature control
Selectable heating or cooling function
Remote acces, data collecting and controlling
with Modbus RTU (Optional)
ESM-3712-HCN
Digital ON / OFF Temperature Controller(ALARM+SET)
Installing parameters using Prokey
2 Output for compressor and alarm controls
Process Set value and Alarm Set value low limit and
set value high limit boundaries
4 Digits Display
NTC Inputor PTC Input (Must be determined in order)
ON/OFF temperature control
Selectable heating or cooling function
Selection of operation with hysteresis
Adjustable temperature offset
Alarm parameters
Adjustable internal buzzer according to Sensor
prob defect and Alarm status
Remote access, data collecting and controlling
with Modbus RTU (Optional)
ESM-3720
Temperature Controller
Installing parameters using Prokey
PID or ON/OFF selectable temperature control
Password protection for programming section
Having CE mark according to European Norms
Adjustable internal buzzer according to sensor
defect status
Digits Display
NTC Input or PTC Input or
Adjustable temperature offset
Set value low limit and set value high limit boundaries
Remote acces, data collecting and controlling
with Modbus RTU (Optional)
ESM-4400
Process Control Device with Universal Input and Dual Set
ESM-XX00
Smart Output Module System
Retransmission of Process Value or Process Control by using
0/4...20 mAdc Current Output Module
Dual or multi point calibration for dc Voltage/Current input
4 Digit process (PV) display
Universal process input (TC, RTD, mVdc, Vdc, mAdc)
Programmable Alarm functions
RS-232 (standart) or RS-485(Optional) serial
communication with Modbus RTU protocol
ESM-4410
Digital ON/OFF Temperature Control Device
ESM-XX10
ON/OFF Control Form
Selectable Heating and Cooling Function
PTC, NTC, PT-100, PT-1000 thermoresesistances input types
Fe-Const (J), NiCr-Ni (K) thermocouples input types
(Must be determined in order)
Operating Type Selection with Hysteresis
Adjustment of Temperature Offset Value
Minimum Pulling Time Adjustment for Control Outputs
Password Protection for Programming Section
ESM-4420
PID Temperature Controller with Universal Input (TC, RTD)
ESM-XX20
Universal process input (TC,RTD)
Automatic adaptation of PID coefficients to the system with
Self-Tune (Step Response Tuning) and Auto-Tune operation
2 Relays and 1 SSR drive output
Soft Start Output For Resistance Durability
4 Digits process (PV) and 4 Digits set value (SV) display
Configurable ON/OFF, P, PI, PD, and PID control forms
Programmable Heating or Cooling Functions for Control Output
Alarm Functions for Alarm Output
SET Value Limitation For System Protection
Sensor Break Protection
ESM-4430
Process Control Device with Universal Input and Dual Set
ESM-XX30
Auto-tune and Self-tune PID
Dual or multi point calibration for dc Voltage/Current input
Bumpless transfer
4 Digits process (PV) and 4 Digits set (SV) display
Universal process input (TC, RTD, mVdc, Vdc, mAdc)
Configurable ON/OFF, P, PI, PD, and PID control forms
Manual/Automatic mode selection for control outputs
Programmable heating, cooling and alarm
functions for control outputs