Trans-GPRS
Trans-Series GPRS Commumication Module
Easy plugging to all Trans Series controller,Gprs commumication, Alarm observatio and archive, DHCP supported, ModBus over TCP/IP comminication protocol, 2G, 2G5 EDGE supported, Suitable for telecommunication projects, GPRS antenna included With Gen-Agent,Multiple GenSet visualisation & control SCADA Software
Trans-I/O
Expansion Inputs/Outputs module
Easy plugging to all Trans series controllers, Configurable 8 inputs and 8 outputs, Each input and output configurable by user or select from list, Selectable hardware type of inputs by +Ve or -Ve, Selectable NO or NC input polarity, Selectable NO or NC output polarity, Adjustable input active delay, Can be used together with remote monitoring modules
Trans-KEY.DISP
Manual and Remote Start Unit with Key Switch
Over / Under Voltage protection
Suitable for Diesel or Gasoline engine
Selectable Generator, Pump and Fire Pump applications
Engine working hour counter for Trans-KEY.DISP model
Parameter configuration via RS-232 serial communication
Configurable Fail Safe mode
Trans-Messenger
Trans Series GSM Communication Module
Easy plugging to all Trans Series controllers, Two way SMS communication (GenSet Mobile), COntrols the generator and monitors status information of the generator by SMS, Remote control via GSM, Sends Alarm informations pre-defined GSM numbers, User may control the device,Clear alarms,RESET, Change MODE's,STOP,START,access the PARAMETRE's of device, Change the parameters and enquire information about generator's active status,
Trans-Midi AMF
Automatic GenSet Controller with Transfer Switching
Log last 50 events & alarm information wiht measured values
Statistics records
Mains & Generator phase sequence control
Selectable Resistive sender types; Pt-100 VDO, US, GM, Ford, Datcon, etc...
CanBus J1939 ECU communication
SPN, FMI and OC values reading from engines via J1939
Remote Start/Stop Speed and Idle mode Control via J1939
Local Remote Control and Visualisation function
Trans-MidiAUTO
Automatic GenSet Controller
Log last 50 events & alarm information wiht measured values
Statistics records
Generator phase sequence control
Power factor measurement for 3 phases
Selectable Resistive sender types; Pt-100 VDO, US, GM, Ford, Datcon, etc...
CanBus J1939 ECU communication
SPN, FMI and OC values reading from engines via J1939
Active, Reactive, Apparent power measurement
Trans-MiniAMF
Automatic Genset Controller with Transfer Switching
CanBus J1939 ECU communication
Remote Start/Stop, Speed and Idle mode control via J1939
Power factor measurement for 1 phases
Selectable Resistive sender types; Pt-100, VDO, US, GM, Ford, Datcon, etc...
Speed sensing from alternator voltage or magnetic pickup
SPN, FMI and OC values reading from engines via J1939