EPM-3790-N
Digital Potentiometer ( 77 X 35mm)
Forward, Reverse direction outputs and error input
for V/F Speed Controller
Operation at Adjustable Set Value
Ramp Function
Economical
Easy to User
4 Digits Display
Easily adjustable set value from front panel
Configurable display scale between -1999 and 9999
Adjustable decimal point
Set value low limit and set value high limit boundaries
Adjustable ramp up and ramp down time
0/2...10Vdc Voltage output or 0/4...20mAdc Current output
(It must be determined in order.)
ERM-3770-N
Digital Tachometer ( 77 x 35 mm)
4 Digits display
NPN or PNP Input Type
Working with Process Set and Alarm Set Value
Alarm output
Relay or SSR driver output (It must be determined in order.)
Alarm set value boundary
Adjustable decimal point
Division Rate
0,07Hz to 10000Hz input signal
Automatic sampling (1 sec. to 16 sec.)
Programming mode password protection
ESM-1510-N
Rail Mounting Type Digital ON/OFF Temperature Control Device
DIN RAIL Mounting
Heating / Cooling Applications
3 Digits display
PTC, NTC PT-100, PT-1000 thermoresesistances input types
Fe-Const (J), NiCr-Ni (K) thermocouples input types
(Must be determined in order)
ON/OFF Temperature Control
Selectable Heating or Cooling Function
Adjustable Temperature Offset Value
Set Value Boundaries
Relay or SSR Driver Output
Compressor Protection Times
ESM-3700-N
Single Set Process Indicator
Adjustable decimal point
5 Stage analog input filter option
Maximum and minimum measurement value are
registered to the devices memory
Maximum or minimum measurement value van be shown
continuously on the display
4 Digits display
Easily adjustable from front panel
Configurable display scale between -1999 and 9999
Selectable universal process Input
(0-10Vdc, 0-1Vdc, 0-60mVdc, 0-20mAdc, 4-20mAdc)
User can be adjust device’s reading value for selected input type
Alarm output, Relay or SSR driver output (It must be determined in order)
Adjustable alarm set value from front panel
ESM-3710-N
Digital ON/OFF Temperature Control Device
Installing parameters using Prokey
Password protection for programming section
Adjustable internal buzzer according to
sensor defect status
4 Digits Display
NTC Input or PTC Input or
J type thermocouple Input or Ktype
thermocouple Input or
2-Wire PT-100 Input ori 2-Wire PT-1000 Input
(Must be determined in order.)
Adjustable temperature offset
ON/OFF temperature control
Selectable heating or cooling function
Remote acces, data collecting and controlling
with Modbus RTU (Optional)
ESM-3711-CN
Digital ON/OFF + DEFROST Cooling Controller
1 Output for compressor control
Operation selection of compressor operate continously,
stops or operates periodically in case of cabinet probe defect
Cooling Application
NTC Input or PTC Input (Must be determined in order.)
ON/OFF Control
Adjustable °C and°F
Set value boundaries
Selectable defrost function (hot gas or electric)
Installing parameters using Prokey (Optional)
Remote access, data collecting and controlling with ModBus RTU (Optional)
ESM-3711-HN
Digital ON/OFF Temperature Control Device With Buzzer
4 Digits display
User can select to start cooking time (Timer) when temperature
reaches to the set value
Adjustable temperature offset
Functional Internal Buzzer
ON / OFF temperature control
User can select to start Cooking Time
when Temperature reaches to the Set Value
PTC, NTC, PT-100, PT-1000 thermoresistances input types
Fe-Const (J), NiCr-Ni (K) thermocouples input types
Temperature Control Output and Alarm Output
Relay or SSR Driver Output
Remote access, data collecting and controlling
wiht Modbus RTU (Optional)
Installing parameters using Prokey (Optional)
ESM-3712-CN
Digital ON/OFF + DEFROST Cooling Controller
3 Output for compressor, defrost and fan controls
Separately adjustable 2 offset value for cabinet and evaporator sensor
Operation selection of compressor operate continously,
stops or operates periodically in case of cabinet probe defect
Fan can be operated depending on evaporator temperature or
(cabinet-evaporator) temperature
Cooling Application
NTC Input or PTC Input (Must be determined in order.)
ON/OFF Control
Adjustable °C and°F
Set value boundaries
Selectable defrost function (hot gas or electric)
Adjustable defrost time from front panel
Installing parameters using Prokey (Optional)
Remote access, data collecting and controlling with ModBus RTU (Optional)
ESM-3712-HCN
Digital ON / OFF Temperature Controller(ALARM+SET)
Installing parameters using Prokey
2 Output for compressor and alarm controls
Process Set value and Alarm Set value low limit and
set value high limit boundaries
4 Digits Display
NTC Inputor PTC Input (Must be determined in order)
ON/OFF temperature control
Selectable heating or cooling function
Selection of operation with hysteresis
Adjustable temperature offset
Alarm parameters
Adjustable internal buzzer according to Sensor
prob defect and Alarm status
Remote access, data collecting and controlling
with Modbus RTU (Optional)
ESM-3720
Temperature Controller
Installing parameters using Prokey
PID or ON/OFF selectable temperature control
Password protection for programming section
Having CE mark according to European Norms
Adjustable internal buzzer according to sensor
defect status
Digits Display
NTC Input or PTC Input or
Adjustable temperature offset
Set value low limit and set value high limit boundaries
Remote acces, data collecting and controlling
with Modbus RTU (Optional)
ESM-3721
Digital ON/OFF and PID Incubator / Hatcher Controller
Temperature ON/OFF and PID Control Selectable
Heating Control Output, Egg Tray Turning Output,
Alarm Control Output
Egg Tray manuel operation from front panel
Auto-Tune PID
4 Digits Display
PTC input
Set Value Boundaries
Alarm parameters and alarm status
can be adjusted according to the audible alert
(internal buzzer functions for alarm conditions)
Password Protection for Programming Section
ESM-3722
Digital ON/OFF and PID Hatcher Controller
Temperature and Humidity
(NTC, PTC, PT-100 or ProNem Mini PMI-D)
Humidity Sensor Input
(0/2..10V, 0/4..20mA or ProNem Mini PMI-D)
Auto-Tune PID
Egg Tray manuel operation from front panel
4 Digits Temperature and 4 Digits Humidity Display
Pronem PMI-P Temperature Sensor Input
Pronem Mini PMI-P Humidity Sensor Input
4 Output for
Temperature Control Output, Egg Tray Turning Output
Humidity Control Output, Alarm Control Output
PID or ON/OFF Selectable Temperature Control
Temperature and Humidity Set Value Boundaries
ESM-3723
Digital Temperature+Humidity Controller
Temperature Sensor Input
(NTC, PTC, PT-100 and ProNem Mini PMI-P)
Auto-Tune PID
Humidity Sensor Input
(0/2..10V, 0/4..20mA or ProHumidity Mini PMI-D)
4 Digits Temperature and 4 Digit Humidity Display
Heating Control Output, Heating Alarm Output
Humidity Control Output, Humidity Alarm Output
PID or ON/OFF selectable temperature control
Set Value Boundaries
ESM-4400
Process Control Device with Universal Input and Dual Set
ESM-XX00
Smart Output Module System
Retransmission of Process Value or Process Control by using
0/4...20 mAdc Current Output Module
Dual or multi point calibration for dc Voltage/Current input
4 Digit process (PV) display
Universal process input (TC, RTD, mVdc, Vdc, mAdc)
Programmable Alarm functions
RS-232 (standart) or RS-485(Optional) serial
communication with Modbus RTU protocol