Showing 1–12 of 61 results

Show sidebar
Close

ECO HR

PID Hot-Runner Control Unit
High Resolution Sensitive PID control TC (J,K,R,S,T Input Types, PT-100) selectable by parameter Low Power Consumption, Energy saving and Environmentally Friendly with 2VA Activate 2nd Set Value by front panel Saving and Recovery of user parameters Return to Factory Settings Digital or RS-485 input for activate the 2nd Set Value (Optional) 3 Digits Process (PV) and 4 Digits Set (SV) display Programmable ON-OFF, P, PI, PD, PID control forms Adaptation of PID Coefficients to the system RS-485 Modbus (RTU) communication (Optional)
Close

ECO LITE

On-Off Temperature Control Unit
TC (J,K,R,S,T Input Types) and RTD inputs selectable by parameter Low Power Consumption, Energy saving and Environmentally Friendly with 2VA Saving and Recovery of user parameters Return to Factory Settings 3 Digits Process (PV) and 4 Digits Set (SV) display ON-OFF control form Selectable heating and cooling function Selectable temperature offset value Operation type selection with hysteresis Minimum pulling time adjustment for control outputs
Close

ECO PID

PID Temperature Control Unit
High Resolution Sensitive PID control TC (J,K,R,S,T Input Types) and RTD inputs selectable by parameter Low Power Consumption, Energy saving and Environmentally Friendly with 2VA Saving and Recovery of user parameters Return to Factory Settings 3 Digits Process (PV) and 4 Digits Set (SV) display Programmable ON-OFF, P, PI, PD, PID control forms Adaptation of PID Coefficients to the system with Self-Tune operation (Step ResponseTuning) and Auto-Tune (limitcycling-tuning) Selectable heating and cooling function RS-485 Modbus (RTU) communication (Optional)
Close

EDA-3700

Process Indicator
AC, DC or True RMS measuring feature Easily changeable from front panel 5A or 60 mV AC, DC, AC/DC input Programmable scale from 5A to 9999A Alarm parameters Password protection for programming mode Having CE mark according to European Norms Remote access,data collecting and controlling with Modbus RTU (Optional)
Close

EPM-3790-N

Digital Potentiometer ( 77 X 35mm)
Forward, Reverse direction outputs and error input for V/F Speed Controller Operation at Adjustable Set Value Ramp Function Economical Easy to User 4 Digits Display Easily adjustable set value from front panel Configurable display scale between -1999 and 9999 Adjustable decimal point Set value low limit and set value high limit boundaries Adjustable ramp up and ramp down time 0/2...10Vdc Voltage output or 0/4...20mAdc Current output (It must be determined in order.)
Close

ERM-3770

Digital Tachometer ( 77 x 35 mm)

Close

ERM-3770-N

Digital Tachometer ( 77 x 35 mm)
4 Digits display NPN or PNP Input Type Working with Process Set and Alarm Set Value Alarm output Relay or SSR driver output (It must be determined in order.) Alarm set value boundary Adjustable decimal point Division Rate 0,07Hz to 10000Hz input signal Automatic sampling (1 sec. to 16 sec.) Programming mode password protection
Close

ESD-9950-N

Analogue Temperature Controller with digital indicator

Close

ESM-1510-N

Rail Mounting Type Digital ON/OFF Temperature Control Device
DIN RAIL Mounting Heating / Cooling Applications 3 Digits display PTC, NTC PT-100, PT-1000 thermoresesistances input types Fe-Const (J), NiCr-Ni (K) thermocouples input types (Must be determined in order) ON/OFF Temperature Control Selectable Heating or Cooling Function Adjustable Temperature Offset Value Set Value Boundaries Relay or SSR Driver Output Compressor Protection Times
Close

ESM-3700-N

Single Set Process Indicator
Adjustable decimal point 5 Stage analog input filter option Maximum and minimum measurement value are registered to the devices memory Maximum or minimum measurement value van be shown continuously on the display 4 Digits display Easily adjustable from front panel Configurable display scale between -1999 and 9999 Selectable universal process Input (0-10Vdc, 0-1Vdc, 0-60mVdc, 0-20mAdc, 4-20mAdc) User can be adjust device’s reading value for selected input type Alarm output, Relay or SSR driver output (It must be determined in order) Adjustable alarm set value from front panel
Close

ESM-3710-N

Digital ON/OFF Temperature Control Device
Installing parameters using Prokey Password protection for programming section Adjustable internal buzzer according to sensor defect status 4 Digits Display NTC Input or PTC Input or J type thermocouple Input or Ktype thermocouple Input or 2-Wire PT-100 Input ori 2-Wire PT-1000 Input (Must be determined in order.) Adjustable temperature offset ON/OFF temperature control Selectable heating or cooling function Remote acces, data collecting and controlling with Modbus RTU (Optional)
Close

ESM-3712-H

Dual Set Digital ON/OFF Heating Device With Buzzer (Set+Alarm)