ATEX Group II Category 2 Gas and Dust, CUTR for Groups II/III Category 2 Equipment
ATEX, CUTR, PED
3-15 or 6-30 psi, 0.2 -1.0 or 0.4 -2.0 bar Pneumatic Signal
Max Outlet Pressure
Standard Temperature, High Temperature
Air, Natural Gas
Contact your local Emerson business partner or sales office to learn about additional specifications or options for this product.
Actuator with or without positioners and snubbers is available in an assortment of sizes, stroking speeds, thrusts, and travels to handle most control requirements.
Yokeless construction permits a low-profile assembly by allowing close coupling to the control device; either through a bracket or, with some versions, by direct mounting on a bonnet flange.
The cylinder (and 3570 positioner if used) can operate with supply pressures as low as 2.4 bar (35 psig) or as high as 10.3 bar (150 psig).
Actuators have maximum rated travels of up to 206 mm (8.125 inches).
Positioner/actuator action is easily reversed in the field with no additional parts. Positioner sensitivity, travel span, and travel starting point are factory set and need to be reset only if operating conditions have changed or if the positioner has be