The operator can start and stop the engine automatically from the front panel push buttons, the unit also provides remote starting of the generator via an external signal. ESR 3.1 is also provided with alternator phase voltage input terminals so that the unit can monitor and protect the generator against over/under speed and over/under voltage failures automatically.

All these readings can be rolled on the display via the push button on the front panel. The control unit contains a 5 digit 7-segment LED display. The operator can monitor the alternator frequency, engine RPM, working engine hours from the front panel, thus avoiding the use of analog type meters on the control cabin.

Other features include monitoring of oil pressure, engine temperature, auxiliary fail input and charge alternator failure.

KEY FEATURES

• Micro-controller based design
• Pre-glow heater control
• Remote Start and Stop function
• Low oil pressure failure detection
• High engine temperature failure detection
• Auxiliary input protection
• Charge alternator failure warning
• Fuel / Start solenoid output relay control
• Alarm Output contact
• Excitation Current feed for charge alternator unit
• Small Dimensions (72mmx72mm)
• Easy connection via screw terminal sockets
• High reliability concept design (MTBF > 50.000 hours)
• Front panel LED indicators
• Auxiliary output contact
• Engine working hour display
• High speed / Low speed protection
• High frequency / Low frequency protection
• Magnetic pick-up input for speed measurement
• High voltage / Low voltage protection (TrueRMS sensing of voltage)
• Battery voltage indication (Vdc) and warning
• Remote start/stop function
• Front panel mounted 5 digit 7-segment LED display for data reading
• IP52 front panel protection class

KEY BENEFITS

The post ENKO ESR 3.1 appeared first on CSO TRADING.

The operator can start and stop the engine manually, via the ignition key-switch mounted on the front panel of the unit. ESR 1.1 is also provided with alternator phase voltage input terminals so that the unit can monitor and protect the generator against over/under speed failures.

The control unit contains a 3 digit 7-segment LED display in order to display the alternator frequency on the front panel, thus avoiding the use of analog type frequency meters on the control cabin.

Other features include monitoring of oil pressure, engine temperature, auxiliary fail input and charge alternator failure.

KEY FEATURES

• Micro-controller based design
• Pre-glow heater control
• Low oil pressure failure detection
• High engine temperature failure detection
• Auxiliary input protection
• Charge alternator failure warning
• Fuel / Start solenoid output relay control
• Alarm Output contact
• Excitation Current feed for charge alternator unit
• Small Dimensions (72mmx72mm)
• Easy connection via screw terminal sockets
• High reliability concept design (MTBF > 50.000 hours)
• Front panel LED indicators for alarm status level
• Front panel 2 digit 7-segment LED display for frequency
• IP52 front panel protection class
• 9-36Vdc supply voltage range

KEY BENEFITS

The post ENKO ESR 1.1 appeared first on CSO TRADING.

In this model, engine cranking can be made manually with the front panel mounted key switch.

ESR 1.0 protects the engine against the failures by monitoring oil pressure, engine temperature, auxiliary fail inputs and charge alternator failure.

KEY FEATURES

• Micro-controller based design
• Pre-glow heater control
• Low oil pressure failure protection
• High engine temperature failure protection
• Auxiliary input protection
• Charge alternator failure warning
• Fuel / Start solenoid output control
• Alarm output contact
• Excitation current feed for charge
• Alternator unit
• Small Dimensions (72mmx72mm)
• Easy connection via rear panel screw terminal sockets
• High reliability concept design (MTBF > 50.000 hours)
• Front panel LED indicators
• IP-52 front panel protection class
• 9-36Vdc supply voltage

KEY BENEFITS

The post ENKO ESR 1.0 appeared first on CSO TRADING.